PCDVD數位科技討論區 - 救救我吧~~新硬體升級的問題~><"

PCDVD數位科技討論區 (https://www.pcdvd.com.tw/index.php)

- 系統組件 (https://www.pcdvd.com.tw/forumdisplay.php?f=19)

- - 救救我吧~~新硬體升級的問題~><" (https://www.pcdvd.com.tw/showthread.php?t=176800)

引用:

Originally posted by 怪盜加州蘋果
Interrupt Mode.
BIOS 的default setting很可能是APIC, 但APIC是給win2k用. winme應該設置為PIC.

你說的選項我找不到耶~~
我只找到APIC Function(APIC功能)
進階可程式中斷訊號控制器~你說的是這個嗎?

你可以換RAM或光碟機試試看,通常藍底白字都是RAM的問題

引用:

Originally posted by 阿帆
對了,我把新買的硬碟設在MASTER,舊的硬碟要設在SL...(忘了!)
不過舊的硬碟上竟然沒說JUMPER要怎麼設!!挖勒~
請問有人知道MAXTOR 20G 5400RPM(32049H2)的JUMPER要怎麼設嗎?
他的JUMPER是我原本是插在左邊數來第2排的針腳上,後來把他改到左邊數來第3排的針腳上,就可以用了,不知道我設的位置是什麼??

請看你硬碟上圖示,不然來這裡看到下方http://www.maxtor.com/en/support/
在最右邊選擇你硬碟型號,之後詳細資料

(Master)
The vertical jumper over the J50 pins is configuring the drive as a Master.
(Master with CLJ)
The vertical jumper over the J50 pins is configuring the drive as a Master.
The vertical jumper over the J46 pins is in the Cylinder Limitation position (CLJ).
(Slave)
No jumper is required to configure the drive as a Slave.
The jumper over the J44 and J42 positions is in the jumper storage position.
(Slave with CLJ)
The jumper over the J44 and J42 positions is in the jumper storage position.
The jumper over the J46 pins is in the Cylinder Limitation position (CLJ).
(Cable Select)
The jumper over the J48 position is configuring the drive for Cable Select.
(Cable Select with CLJ)
The jumper over the J48 position is configuring the drive for Cable Select.
The jumper over the J46 pins is in the Cylinder Limitation position (CLJ).

引用:

Originally posted by 阿帆
你說的選項我找不到耶~~
我只找到APIC Function(APIC功能)
進階可程式中斷訊號控制器~你說的是這個嗎?

對, 是這個. Disable它吧.

引用:

Originally posted by mokog123
請看你硬碟上圖示,不然來這裡看到下方http://www.maxtor.com/en/support/
在最右邊選擇你硬碟型號,之後詳細資料

(Master)
The vertical jumper over the J50 pins is configuring the drive as a Master.
(Master with CLJ)
The vertical jumper over the J50 pins is configuring the drive as a Master.
The vertical jumper over the J46 pins is in the Cylinder Limitation position (CLJ).
(Slave)
No jumper is required to configure the drive as a Slave.
The jumper over the J44 and J42 positions is in the jumper storage position.
(Slave with CLJ)
The jumper over the J44 and J42 positions is in the jumper storage position.
The jumper over the J46 pins is in the Cylinder Limitation position (CLJ).
(Cable Select)
The jumper over the J48 position is configuring the drive for Cable Select.
(Cable Select with CLJ)
The jumper over the J48 position is configuring the drive for Cable Select.
The jumper over the J46 pins is in the Cylinder Limitation position (CLJ).

這位大大,謝謝你囉~:)

引用:

Originally posted by 怪盜加州蘋果
對, 是這個. Disable它吧.

請問關掉這個有什麼作用啊??:)

引用:

Originally posted by 阿帆
請問關掉這個有什麼作用啊??:)

就不會用到超過15的IRQ,不知道對不對:rolleyes:
阿帆,A7N8X買了沒,快一點買啦:mad:

引用:

Originally posted by 天昏地暗
就不會用到超過15的IRQ,不知道對不對:rolleyes:
阿帆,A7N8X買了沒,快一點買啦:mad:

1.真的不知道><"是系統會較穩定嗎?
2.等下禮拜我開學後就會買啦~:D:D:D
這種高級的玩意,要等我去嘉義後再買,斗六這可憐的小地方應該是不會有啦,就算有價錢也應該.....:(:(