PCDVD數位科技討論區 - 燒機測試.....

第2頁共2頁

PCDVD數位科技討論區 (https://www.pcdvd.com.tw/index.php) - 效能極限 (https://www.pcdvd.com.tw/forumdisplay.php?f=18) - - 燒機測試..... (https://www.pcdvd.com.tw/showthread.php?t=187897)

狂之風	2003-03-31 07:41 AM

引用:

Originally posted by petitdragon
不贊同以Super Pi或CPUMark99等過氣軟體測試 (那容易誤導超頻者以為系統已經"穩"了). 我強烈建議用以下 (歐美公認的) 三個軟體:

1, Prime95 (ftp://mersenne.org/gimps/p95v2212.zip) Torture Test, for CPU.

2, Memtest86 3.0 (http://www.memtest86.com/memt30.zip), for Memory.

3, 3DMark2001 (Dx8) or 3DMark2003 (Dx9), for Video.

如果能通過這三個軟體的overnight test (即睡前開始測, 隔日起床它還在跑, 共約6-8小時), 則可勉強稱為100% stable的系統. Prime95 Torture Test更可很快 (約1-30分鐘) 讓你知道CPU是否超過頭; 與Super Pi等Windows95時代的測試軟體不同的是, Prime95充分利用了近代CPU的New Features (如SSE2, 3DNow!+等).

SO...let me ask you a question, when was that prime95 released? Is it a old style system benchmark or a new style one?:D

petitdragon

2003-03-31 09:17 AM

引用:

Originally posted by 狂之風
SO...let me ask you a question, when was that prime95 released? Is it a old style system benchmark or a new style one?:D

The Latest revision of Prime95 is V. 22.12.1 that is dated at 8th Nov. 2002 (Please refer to its release history.). SuperPi has been stuck at 22nd Sep. 1995 and out-dated (obsolete) obviously.

Technically, Seti @ home can not be a PC stability testing tool, you should know that.:)

狂之風	2003-03-31 10:41 AM

引用:

Originally posted by petitdragon
The Latest revision of Prime95 is V. 22.12.1 that is dated at 8th Nov. 2002 (Please refer to its release history.). SuperPi has been stuck at 22nd Sep. 1995 and out-dated (obsolete) obviously.

Technically, Seti @ home can not be a PC stability testing tool, you should know that.:)

Y, I appreciate your reply, certainly , the super pi is outdate; however, it can tell if your RAM or CPU are stable enough to calculate it's iterations. Eventhough the seti@home could not be the test for system stablity test, some people still beleive that is not a bad tool for that purpose. Every benchmark got it's own value right? :)

62chaokai

2003-03-31 11:42 AM

GOOD！GOOD！

燒機嗎！測穩定性！如不嫌麻煩，不嫌花很多時間，就都拿來跑跑嗎！

這樣就好了。市面是找得到的燒機軟體，肯定超過10種，都試試。

Rocket

2003-04-02 05:37 PM

請問，CPU Burn-in這個程式，是直接開啟後，
輸入需要的時間，再按開始就可以了嗎？因為我
按開始後，感覺都沒動作，只不過輸入時間的欄
位變成反白的狀況，不能輸入，這樣是已經在執
行了嗎~~~ 謝謝回答的大大。:agree: :agree:

maxguy

2003-04-07 04:17 AM

Prime95 實在是很操...
而且只要CPU或是記憶體有一點點問題馬上就把你踢出去了!!

測極限 SuperPI 可以在 2.5g 上跑完32M...
Prime95 不管我怎樣加CPU電壓... 只能 2.4 g 跑個10小時~ 2.5g了話大概10分鐘都撐不住吧!!

coolalert

2003-04-07 05:29 AM

引用:

Originally posted by maxguy
Prime95 實在是很操...
而且只要CPU或是記憶體有一點點問題馬上就把你踢出去了!!

測極限 SuperPI 可以在 2.5g 上跑完32M...
Prime95 不管我怎樣加CPU電壓... 只能 2.4 g 跑個10小時~ 2.5g了話大概10分鐘都撐不住吧!!

那是溫度的問題
如果測極限 SuperPI 可以在 2.5g 上跑完32M
他的溫度上升的沒prime95那麼高
使用prime95以後會快速的燒機
只要能壓住溫度跟使用prime95前一樣,或者跑32M的溫度
就絕對撑的住:cool:

所有的時間均為GMT +8。現在的時間是01:21 AM.

第2頁共2頁

每頁顯示此主題的 10 個文章

vBulletin Version 3.0.1
powered_by_vbulletin 2026。