我想你多慮了.......
如果從那邊買到的有假貨
我出一萬倍的價格跟你買下吧
兩百萬我還付的起

雖然那邊人氣不如這裡旺
不過 我想還不至於做出這種無恥的事情
(我只是個平凡網友 跟該網沒有任何商業關係)

呵呵 台灣要買到 "假的"AS3其實也蠻難的...
AS3都沒有在市場上舖貨了...更何況是假的...

假的


真的


以上圖片引用自AS3官方網站 www.arcticsilver.com


會出油是一般添加矽化合物的散熱膏都會有的問題...
包括AS3也是...

不使用時盡量把針頭朝上,讓油沉澱到尾部,
並放置在陰涼的地方,會減慢出油的速率... :)

原來是要相反,我都把針頭朝下,難怪還是水水油油的
是油太�**椄O膏太輕呢?

引用一下官方網站的原文說明...

Storage
Like any mix of particles that are many times heavier than the suspension fluid, there will be some separation in the compound over time when stored in the original syringe. (All thermal compounds eventually experience some separation in storage.) This does not affect the performance of the unseparated or remixed compound.

To keep the compound fresh for future applications, always replace the cap on the syringe after each use. The syringe should be stored tip down so that any separation that occurs will be at the back end of the syringe with fully suspended particles below that. Storing in a cool place like a refrigerator will also lessen the separation over time.

意思是說 儲存時要放置在陰暗的地方,
並且 針頭朝上 :)

啊!原來是stored tip down.
多謝