首先要說的是:
若是有接電視卡(BTB8x8晶片系列), 你的顯示卡絕對不能用TNT2系列的,因為會相衝,電視訊號會出不來.(聽得到聲音卻看不到影像).
而用ATI公司系列,無論是低階甚至到高階的,只要視訊範圍超過320*240就會出現怪(線)像.全螢幕更慘.就是不知道為什麼呢?
目前用過的S3,VOODOO,SIS系列,都相容.且沒以上現象.其實擷取的影像品質與顯示卡無太大關係,(我用S3捉下來的影片,與用較好的顯示卡捉下來的品質相當).而是取決於你用什麼顯示卡撥放有關,若你是用有硬 體解VCD的顯示卡,
則你擷取影像的效果美美的,有不錯的品質(TNT2系列就不行了).
而流暢度與你的
RAM 128以上
硬碟轉速(基本要7200轉)硬碟要夠大,因擷取的影像為AVI多媒體,1秒是3MB多
CPU(最好是P2 K6-3 以上)
良心建議 : SIS300(正在用) 或SAVEGE2000(猜的 因沒用過)或VOODOO3(用過)對於製作VCD有很棒的效果.
G400沒用過, 故不知道會不會相容,你可以用用看,
然後再討論討論 .
基本是,應該是很棒才對.
可是G400出了其對應用的電視擷取卡.G400的附加卡.
(非G400TV ALLINONE)
是不是因為與其他牌電視卡不相容就不得而知了.

請問一下喔~~
我最近想買電視卡,我的顯示卡是Savage 4 Pro+ 32MB
可以搭配ATI TV Wonder這塊電視卡嗎??
撥放電視的畫質如何?? 擷取畫面的品質又如何呢??
還是有更好的選擇呢??
請您給予指教. Thanks.

我是很建議現在不要買電視卡了
買一種USB介面的電視盒 一樣可以擷取影像 與一般電視卡功能相當 但是是外接的 所以接線方便 不過比一般電視卡貴1000元左右

某公司說發現TV卡 如果加上TNT2系列的顯示卡(驅動程式2.17版以上的話) 在使用上會出現黑色畫面的問題,如果驅動程式在2.17版之前的話就不會有問題!!立即下載

那~~,請問喔...
電視盒是不是會傷害monitor...

而..電視卡則不會ㄋ
(因為它是開一個視窗,不是切換的)...

那..USB的電視盒ㄋ...?

Thank you...

to Marty
用電視盒不錯呀 不會傷害螢幕的，偶的爛螢幕sampo 761TQ+圓剛的電視盒用了3年~~~ 服役中

我之前有一張TNT的卡,配上TV(Bt848)卡
可以看,沒什麼大的問題,
唯一的問題是,有時移動畫面時會當機
不知大家會不會這樣,我的主機是MS5169(ALI)不知是不是主機的問題還是TNT的問題..

還有就是TV卡(Bt848),配Trident的顯示卡好像都會有很大的問題..不知大家來沒有經驗啊,....

I).VGA Compatibility

1) Overlay mode of those VGA are not supported by graphics controller.

S3 Vision 968
Matrox Millenium MGA 64bit
Matrox Millenium II MGA 2164
Matrox Mystique PowerDesk MGA 64bit
Matrox Mystique II AGP PowerDesk MGA 64bit

2) Those of graphics drivers are not Direct Draw compliant.

Cirrus Logic CL-GD5434-HC-D

3) Those of poor quality overlay mode video, please change another VGA.

Cirrus Logic CL-GD5464-HC-A
Cirrus Logic CL-GD5465-HC-A

4) Those of VGA with the bandwidth problem, run in 16bit mode only.

ATI 264GT
S3 Vision 325 Virge(DX/GX)

5) Those of VGA chipsets do not support color key natively.

Tseng VGA 6) Those of S3 VGA need to modify the registry key value.
Please set VGA run in 16bit mode for S3 775 only.

S3 Vision 775 Trio64V2(DX/GX)
S3 Savage 3D

7) Those of graphics cards run on BT848 driver version V2.30.40 only.
You have to get this driver to prevent PC hanged.

Trident 3D Image 9750
Trident 3D Image 9850

8) Those of graphics cards come with color bar noise.
You have to get the new VGA driver from your VGA vendor.

Trident 3D Image 9880

9) Those AGP cards work with TV application V3.08 or later.
Please select VGA chipset in TVCFG.EXE System Configuration Utility.

ATI Rage Turbo/ IIC
Chromatic MPACT II
Intel i740
Intel i810
Matrox Millenium G200 (Update driver V4.11.01.2110)
RIVA 128 (Update driver to enable overlay overlay service)
RIVA 128 ZX (Update driver to enable overlay overlay service)
RIVA TNT (Update driver TNT/TNT2 V4.11.01.30 or higher)
RIVA TNT2 (Update driver TNT/TNT2 V4.11.01.30 or higher)
S3 86C365 Trio 3D
S3 86C362 LC2X
S3 Savage 3D
SiS 6326 (1024x768 16 bit color or lower)
VooDoo Banshee (Must update 3Dfx drivers)

10) Those of graphics cards listed below support primary service only.
You have to get the new VGA card driver from your VGA vendor to
support overlay overlay service.
The solution is to watch TV in primary service mode only.
The OSD and the full screen functions are disabled, but you can
check the FORCE FULL SCREEN parameter in video setting dialog
to force DirectX driver change mode to 640x480 and full screen.

3D Labs Permedia II (Leadtek LR2300)
VooDoo Banshee


11) Those of graphics cards listed below may halt PC.
You have to get the new VGA card from your VGA vendor.

VooDoo III (Driver issue)
SiS 620 Chipset embedded VGA (Hardware issue)

There is an internal path inside SiS620 which is provided to perform
the transactions from PCI bus to GUI bus, wherein the video capture
card is resided on PCI bus while the graphic accelerator is integrated
behind the internal GUI bus. It should be emphasized that the internal
path from PCI bus to GUI bus just supports to perform memory write
transactions in unique direction.

The temporary solution is not to display video at OVERLAY mode.
The video capture function can still be used in Non-Overlay mode.
This bug has been fixed on 620 A2.

The only solution is to configure capture device in PREVIEW ONLY.

12) Those of graphics cards listed below may halt PC.
You have to update the VGA driver from your VGA vendor.

S3 Savage 4 Pro AGP VGA (Driver issue)

S3 Savage 4 AGP cards come with a hardware problem with the PCI
bus master driver in the revision C or prior. The new driver runs
in overlay mode but not stable. Video image may lost and only
color key (magenta) on the video display window.
Please close TV application and run again to get video back.
This problem is said to be fixed in revision D.
Please update the driver from S3's web site.

13) Those VGA cards that are not listed.

The VGA cards that not listed above do not mean they can not work
with Brooktree BT848/878. Be sure that the VGA card supports
DirectX 5.0 or higher and the overlay service is a must.

哇,你的資料從那來的這麼的完全,真是利害...
就你的分析你覺的那一張卡,video最強啊...
再文章中,似乎不沒有談到ATI的Rage128及G400
是因他們沒有問題,還是你沒有這一方面的數據...
謝謝你,提供這麼完善的數據給大家了解..