引用:
作者ericshliao
現在碰到的問題是,當GEEXBOX畫面出現,接著有以下的錯誤訊息。看起來似乎是NFS那邊出了問題,但不知怎麼處理。
debug, Sending select fo 192.168.0.x...
info, Lease of 192.168.0.x obtained, lease time 86400
route: SIOC[ADD|DEL]RT: Unknown error 3
nfs warning: mount version newer than kernel
NFS: mount program didn't pass remote address!
....
|
不知道你的配置如何
首先你的GEEXBOX光碟檔案必須先用mkzftree -u還原處理(
第2頁編號17篇回覆補充),不能直接複製出來用
我的配置如下
我的NFS Server IP是
192.168.0.1
還原過的GeeXboX檔案放在 F:\gb-1.0
NFS Server Expirted Alias:
/gb-1.0
TFTPD的Base Directory指向 F:\gb-1.0\boot
F:\gb-1.0\boot\pxelinux.cfg\default 的內容為
..略
LABEL geexbox
KERNEL vmlinuz
APPEND initrd=initrd.gz root=/dev/ram0 rw init=linuxrc boot=nfs splash=silent vga=789 video=vesafb:ywrap,mtrr
nfsroot=192.168.0.1:/gb-1.0
LABEL install
KERNEL vmlinuz
APPEND initrd=initrd.gz root=/dev/ram0 rw init=linuxrc boot=nfs installator
nfsroot=192.168.0.1:/gb-1.0
LABEL debug
KERNEL vmlinuz
APPEND initrd=initrd.gz root=/dev/ram0 rw init=linuxrc boot=nfs splash=0 vga=789 video=vesafb:ywrap,mtrr debugging
nfsroot=192.168.0.1:/gb-1.0